Forum: 380 DB Series I - Series III

Hey guys i need to replace my clutch on a 380. Just wondering can you get the gear box out With out taken the cross member out.

Hi Guys, Need to get new nipples for my calipers as they are a bit rounded. Are they a 10mm all round? Don’t want to pull mine out and then find I have the wrong size. The internet has not been a great help. Cheers.

Hi all, I have 380 series 1 that I have had for 10 years now, one of my rear wheel bearings is noisy, does anyone know if the rear hub needs a puller to get it off or is it a simple matter of just undoing the bolts?. Thanks in advance, Lindeman.

Hi. As the subject suggests the front passenger and both rear windows are not working. I have replaced the main drivers side console (because some switches were broken) and checked the fuses under drivers side dash and the bonnet but seem OK. Additionally, each passanger window control is...

Anyone know how to remove the front bar on a 380 VRX? Was looking for a haynes or max ellerys book but they decided not to make one for the 380.. Step by step with photos would be an advantage. Thanks

Anyone know which fuse to piggy back off in the fuse box? I would normally use accessories but not which one that is

hi All, I've got a 380 and the passenger side window stopped working and it's in the UP position. I've got the door linings off. I can see the regulator and the 4 bolts fixing the regulator to the door. My understanding is that there are 2 more bolts fixing the window to the regulator. These must...

Hi all, I went to Repco and asked for drive belt as I'm going to replace timing belt etc and might as well do it... They only gave me 1 belt with code 6PK1230RB. Anyone know what other belts I need?

Boot lid will not open via remote on key, or glove box button. No solenoid sound. Will open via mechanical pull cord. Where is solenoid situated? Can I try electrical test. Have workshop manual on disc, like reading Chinese. Hopefully someone can assist. Regards, Silverman.

Hi all, Dad's 380 chewed a valve (suspected broken bolt on timing tensioner, who knows if it's mechanical fault or mechanics fault from the timing belt changed 6 months ago..) As the car is now worthless, unless the wrecker next door offers $50 for it, I was wanting to ask the mechanics and...

Chasing some much needed diagnostic advice....:pleasesign: 2008 380 GTL, 218k, fully serviced, first owner, faultless (Mitsubishi) history apart from (warranty) thermostat replacement, good battery. Non-Mitsubishi history - rats.....around 155k, chewed knock sensor loom in the valley, threw a...

MITSUBISHI 380, 2006 My wife managed to scape a pole and I lost the right hand side "vent/grille" that locks into the base of the front bumper. Trying to find a replacement. Can anyone advise the name of that part - tried everything to find it - and where it may be available. Located in Newcastle,...